|
|
#50RH (SI #270-11010) Round Automatic Feed Tip with Roller & Handle for 1/8” & 5/32” dia welding rod. The welding rod is inserted into the feeder tube and once the rod adheres to the base plastic the user can use the handle, which gives the user more control. The roller helps push the welding rod into the seam or groove.
$158.40 |
|
|
#50RTH (SI #270-11101) Triangle Automatic Speed Tip with Roller & Handle for 1/8” & 5/32” dia welding rod. The welding rod is inserted into the feeder tube and once the rod adheres to the base plastic the user can use the handle, which gives the user more control. The roller helps push the welding rod into the seam or groove.
$159.45 |
|
|
#60RTH (SI #270-11102) Triangle Automatic Speed Tip with Roller & Tip for 3/16” dia welding rod. The welding rod is inserted into the feeder tube and once the rod adheres to the base plastic the user can use the handle, which gives the user more control. The roller helps push the welding rod into the seam or groove.
$159.45 |
|
|
#60RH (SI #270-11103) Round Automatic Speed Tip with Roller & Handle for 3/16” dia welding rod. The welding rod is inserted into the feeder tube and once the rod adheres to the base plastic the user can use the handle, which gives the user more control. The roller helps push the welding rod into the seam or groove.
$158.25 |
|
|
#6R (SI #270-11013) Strip Feeder Tip for Triangular Flexible Strips. This tip is hand-held and is used to push triangular welding strips into seams or grooves. Insert the welding rod into the feeder tube. Make sure to keep the welder moving in a fanning motion on the underneath side of the welding rod, while keeping continuous pressure on the welding tip.
$108.75 |
|
|
#6G (SI #270-11014) Strip Feeder Tip for Flat Flexible Strips. This tip is hand-held and is used to push flat welding strips into seams or grooves. Insert the welding rod into the feeder tube. Make sure to keep the welder moving in a fanning motion on the underneath side of the welding rod, while keeping continuous pressure on the welding tip.
$85.75 |
|
|
#30R (SI #270-11008) Round Automatic Feed Tip with Roller for 3/16” dia welding rod. This tip is an automatic speed tip, which allows the user to have a free hand. The welding rod is inserted into the feeder tube and once the rod adheres to the base plastic the user can let go of the welding rod. The roller helps push the welding rod into the seam or groove.
$122.00 |
|
|
#40R (SI #270-11009) Round Automatic Feed Tip with Roller for 1/8” & 5/32” dia welding rod. This tip is an automatic speed tip, which allows the user to have a free hand. The welding rod is inserted into the feeder tube and once the rod adheres to the base plastic the user can let go of the welding rod. The roller helps push the welding rod into the seam or groove.
$122.00 |
|
|
#30RT (SI #270-11022) Triangle Automatic Speed Tip with Roller for 3/16” dia welding rod. This tip is an automatic speed tip, which allows the user to have a free hand. The welding rod is inserted into the feeder tube and once the rod adheres to the base plastic the user can let go of the welding rod. The roller helps push the welding rod into the seam or groove.
$152.75 |
|
|
#40RT (SI #270-11027) Triangle Automatic Speed Tip with Roller for 1/8” & 5/32” dia welding rod. This tip is an automatic speed tip, which allows the user to have a free hand. The welding rod is inserted into the feeder tube and once the rod adheres to the base plastic the user can let go of the welding rod. The roller helps push the welding rod into the seam or groove.
$124.25 |
|
|
#15 (SI #270-11024) Strip or Ribbon Automatic Speed Tip. This tip is used for 5/8” wide x 1/16” thick ribbon rod. Insert the ribbon rod into the feeder tip, once the rod has adhered to the base plastic the user can let go of the rod.
$97.50 |
|
|
#17 (SI #270-11029) Ribbon Automatic Speed tip for ¾” wide x 1/16” thick. Insert the ribbon rod into the feeder tip, once the rod has adhered to the base plastic the user can let go of the rod.
$108.50 |
|
|
#4 (SI #270-11011) Tacking Tip. No welding rod is required with this tip. This tip is used to tack a seam together. This is strictly a pre-welding tip. Drag the tip along a seam to hold in place until a permanent weld is completed.
$29.50 |
|
|
#4L (SI #270-11011L) Long Reach Tacking Tip. No welding rod is required with this tip. This tip is used to tack a seam together. This is strictly a pre-welding tip. Drag the tip along a seam to hold in place until a permanent weld is completed. The Long Reach Tacking Tip enables users to get into tight corners and smaller areas easier than the original tacking tip.
$41.80
|
|
|
#5 (SI #270-11012) Round Tip. This tip takes any size welding rod. With the welder in one hand and the welding rod in the other, use a fanning motion on the underneath side of the welding rod and the top of the base plastic. Remember to keep continuous pressure on the welding rod.
$20.85 |
|
|
#7 (SI #270-11015) Flat tip for Flexible Strip or Ribbon Rod. With the welder in one hand and the welding rod in the other, use a fanning motion on the underneath side of the welding rod and the top of the base plastic. Remember to keep continuous pressure on the welding rod.
$56.75 |
|
|
#8 (SI #270-11016) “V” Tip for Corner Welding with Flexible Strip or Ribbon Rod. With the welder in one hand and the welding rod in the other, use a fanning motion on the underneath side of the welding rod and the top of the base plastic. Remember to keep continuous pressure on the welding rod.
$68.20
|
|
|
#11 (SI #270-11019) Triangle Automatic Speed Tip for 1/8” & 5/32” dia welding rod. This tip is an automatic speed tip, which allows the user to have a free hand. The welding rod is inserted into the feeder tube and once the rod adheres to the base plastic the user can let go of the welding rod.
$97.50 |
|
|
#13 (SI #270-11021) Round/Triangular Automatic Speed Tip for 3/16” dia welding rod. This tip is an automatic speed tip, which allows the user to have a free hand. The welding rod is inserted into the feeder tube and once the rod adheres to the base plastic the user can let go of the welding rod. $99.50 |
|
|
#12 (SI #270-11020) Shrink Tubing Tip for Heat Shrinking Plastic Tubing.
$59.00 |
|
|
#9 (SI #270-11017) Round Automatic Speed Tip for 1/8” & 5/32” dia welding rod (Old Style). This tip is an automatic speed tip, which allows the user to have a free hand. The welding rod is inserted into the feeder tube and once the rod adheres to the base plastic the user can let go of the welding rod.
$87.99 |
|
|
#10 (SI #270-11018) Round Automatic Speed Tip for 3/16” dia welding rod (Old Style). This tip is an automatic speed tip, which allows the user to have a free hand. The welding rod is inserted into the feeder tube and once the rod adheres to the base plastic the user can let go of the welding rod.
$87.99 |
|
|
#9A (SI #270-11025) Round Automatic Speed Tip for 1/8” & 5/32” dia welding rod (New Style). This tip is an automatic speed tip, which allows the user to have a free hand. The welding rod is inserted into the feeder tube and once the rod adheres to the base plastic the user can let go of the welding rod. This tip is smaller and a bit more symmetrical and can get into corners and smaller places easier than the old style automatic speed tips.
$110.00 |
|
|
#10A (SI #270-11028) Round Automatic Speed Tip for 3/16” dia welding rod (New Style). This tip is an automatic speed tip, which allows the user to have a free hand. The welding rod is inserted into the feeder tube and once the rod adheres to the base plastic the user can let go of the welding rod. This tip is smaller and a bit more symmetrical and can get into corners and smaller places easier than the old style automatic speed tips.
$110.00 |
